Need support? Contact us at 1-888-286-3204

S631: Athena Log

What is Athena Log?

With Athena Log, you have the ability to record both static and RTK measurements at the same time. Check out the write up below on static measurements. 

How Do I Record Static Data?

To record static data with the Hemisphere S631, you will need to connect to the WebUI. Please consult the below guide on connecting to the WebUI. 

Once connected to the WebUI, select the Settings option in the top right corner. 

Next select the NMEA & Athena Log option. 

Scroll down and locate the Athena Log option. Select enable. 

With the mode selected, you can select Save.

Once saved, you will be returned to the Status page, where you can select Start Record to enable the data collection. 

Once selected, the static file will be begin to be logged to the receiver. To achieve centimetre or better results, record at minimum 4 hours, assuming good conditions. For more information on downloading and processing the data, see the below guides. 

You can stop the recording at any time by selecting Stop Record or by turning the receiver off. Your file will not be lost if the receiver loses power or the receiver is turned off. 

Contact Support

Contact Support